Search results for " Combustion"

Improvement of Biomass Gasification/Combustion Characteristics by Microwave Pretreatment of Biomass Pellets

2021

THE POSSIBILITY OF DISPOSING OF SPENT COFFEE GROUND WITH ENERGY RECYCLING

2015

The current policy of waste management requires, above all, a gradual reduction of waste amount and, to a larger extent, forces us to seek new methods of waste disposal. Recycling the energy contained in biomass waste is a more and more universally applied method of thermal converting. Biomass combustion allows saving fossil fuels which fits into sustainable development. This paper checks the possibility of using spent coffee ground (SCG) in energy recycling using a combustion process. This particular biomass type up to now has not been widely examined, which inclines to consider its usage as a potential additive to alternative fuels. In the study, we examined the quality of fuel, which was…

Influence of Elevated Pressure on the Torrefaction of Wood

2016

The use of pressurized reactors in industrial processes can improve efficiency and economics. Torrefaction is a partial pyrolysis of lignocellulosic biomass designed to result in a solid product with improved fuel properties for utilization in combustion and gasification. In this work, the influence of elevated pressure on the torrefaction of wood has been investigated. Wood samples were torrefied using a pressurized thermogravimetric reactor (PTGR) with pressures of 0.1 to 2.1 MPa. The results indicate that reactor pressure, particle size of feedstock, and wood species are all factors in torrefaction yield improvements. Torrefaction at 2.1 MPa pressure improved the higher heating value (ca…

Upgrade of citrus waste as a biofuel via slow pyrolysis

2015

Abstract Slow pyrolysis (200–650 °C) experiments on citrus residues (orange peel waste “OP” and lemon peel waste “LP”) were carried out in lab scale fixed bed batch reactor. Bio-oil and bio-char obtained by thermal degradation are more stable, more homogeneous and higher energy content fuels when compared to the parent feedstock. Thermogravimetric analysis (TGA) showed higher stability of LP waste, which appears related to the higher lignin content . Mass and energy yields of solid and liquid products (i.e., char and oil) were measured to determine the effects of peak temperature on feedstock. A linear correlation between Gross Calorific Value (GCV), peak temperatures and mass loss (ML) all…

Ceria-based electrolytes prepared by solution combustion synthesis: The role of fuel on the materials properties

2016

Ce0.8Sm0.2O2 − xpowders were synthesized by solution combustion synthesis using citric acid, cellulose and sucrose as single, or intimately mixed, fuels. The powders were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2sorption at −196 °C, H2-temperature programmed reduction and thermogravimetric analyses. Textural properties of the powders were shaped by the peculiar employed fuel. The study of reducibility revealed that oxygen vacancies formation is mainly influenced by both parameters, specific surface area and total pore volume. The different tendency toward reduction played a key role in sintering under reducing atmosphe…

Ba0.5Sr0.5Co0.8Fe0.2O3-x electrocatalyst prepared by combustion-based methods: the role of the fuel type

2010

Strontium and iron-doped barium cobaltite prepared by solution combustion synthesis: exploring a mixed-fuel approach for tailored intermediate temper…

2013

Ba0.5Sr0.5Co0.8Fe0.2O3-? (BSCF) powders were prepared by solution combustion synthesis using single and double fuels. The effect of the fuel mixture on the main properties of this well-known solid oxide fuel cell cathode material with high oxygen ion and electronic conduction was investigated in detail. Results showed that the fuel mixture significantly affected the area-specific resistance of the BSCF cathode materials, by controlling the oxygen deficiency and stabilizing the Co2+ oxidation state. It was demonstrated that high fuel-to-metal cations molar ratios and high reducing power of the combustion fuel mixture are mainly responsible for the decreasing of the area-specific resistance o…

New synthetic strategies for the enhancement of the ionic conductivity in Ce0.8Sm0.2O2-x

2013

Introduction Samarium-doped ceria has been widely investigat-ed for electrochemistry applications as full density elec-trolyte for intermediate temperature solid oxide fuel cells (IT-SOFC), between 500°C and 800°C [1]. One of the main challenges for the ceria-based electrolytes is to decrease the resistivity at the grain boundary zone, especially in this low temperature range. Microstructure and morphology of the powder play a fundamental role on the densification behaviour and grain boundary properties, thus affecting the overall conductivity of electrolytes [2]. In this light, solution combustion syn-thesis (SCS) represents a flexible method to produce ultra fine powders with suitable mic…

Semi-continuous feeding and gasification of alfalfa and wheat straw pellets in a lab-scale fluidized bed reactor

2015

Abstract Small scale air-blown fluidized bed gasification of alfalfa and wheat straw pellets were conducted for semi-continuous solid feeding and range of operating conditions varied due to the modifications in equivalence ratio (ER) (0.20–0.35) achieved both by varying solid and air input. Alfalfa pellets displayed an improvement in several gasification variables such as gas lower heating value (∼4.1 MJ/Nm3), specific gas yield (1.66 Nm3/kg), cold gas efficiency (∼42%) and carbon conversion efficiency (∼72%) as ER maximized to 0.35 which was found optimum for this feedstock for the present course of experiments. Gasification parameters of wheat straw pellets on the other hand were characte…

PCDDs, PCDFs, PCDTs, PCBs and some other organochlorine compounds in pine needles exposed to pulp and paper mill emissions and effects of waste combu…

1997

Concentrations of semivolatile chlorinated organic compounds α-HCH, lindane, HCB, DDT, DDE, DDD, chlordanes and PCBs, and low-volatility compounds PCDDs, PCDFs and PCDTs in pine needles in a recipient area of the emissions from a pulp and paper mill where also waste combustion was done were measured. Mostly, the concentrations were found to be near the background levels. Elevated concentrations of HCB, some PCB congeners and some HxCDF isomers in samples from two sampling points were observed. Some other possible point sources of these compounds are situated in the vicinity of the pulp and paper mill.. Also the community of Pietarsaari is one possible source of the slightly elevated concent…